Previous
Next

eGPU adapter UTG4-BK8 PCIe 3.0 x16 USB4 | Thunderbolt macOS, Windows 40 Gb/s stand

KOD UTG4-BK8 Category Abart Pro - Akcesoria i dodatki EAN 5904917097878 Delivery time 2 - 4 days
zł673.98 Tax excluded
zł829.00
Tax included
0/5

The UTG4-BK8 is a PCIe 3.0 x16 to USB4 or Thunderbolt adapter to connect, for example, a high-speed external graphics card to a PC with a USB4 or Thunderbolt connector or another PCIe card to a mac or PC with a USB4 or Thunderbolt connector. Kit includes a stand that supports the card and power supply in an upright position.

Add to Cart

The UTG4-BK8 is a PCIe 3.0 x16 to USB4 or Thunderbolt adapter to connect, for example, a high-speed external graphics card to a PC with a USB4 or Thunderbolt connector or another PCIe card to a mac or PC with a USB4 or Thunderbolt connector.

With this UTG4-BK8 adapter, you will connect a Windows PC with USB 4 or Thunderbolt ports:

  • a high-speed external graphics card, and 

to macOS and Windows PCs:

  • high-speed external network card - e.g. 2x 10GbE, 2x 25GbE, 2x 40GbE
  • SAS, SATA or NVMe controller
  • RAID controller
  • video capture or editing card
  • audio capture or editing card
  • and other PCIe cards 

The data transfer rate between the PCIe connector and USB 4 | Thunderbolt is max. 40 Gbps

For correct operation of the adapter, an external ATX power supply with a wattage compatible or higher with the PCIe card to be installed is required - the power supply is not included.

Questions and answers

Q1: There are three switches on the UTG4-BK8 adapter. What are they used for?

SW1: forced start switch for the graphics card. Position 1 for automatic start, position 2 forced start. By default, the switch is set in position 1 to automatically start the graphics card

SW2: Forced shutdown switch for the USB5V power supply. Position 1 for automatic start-up, position 2 for forced start-up. By default the switch is set to position 1 for automatic start-up

J3: ASM2464PD circuit power switch. ON position for automatic start-up, OFF position for power off. By default, the switch is set to ON position for automatic start-up of the circuit.

Technical specifications

  • 64 Gbps PCIe 4.0 x4 bus speed
  • USB4 | Thunderbolt 4 | Thunderbolt 3 40 Gb/s host interface
  • 0.7m USB-C cable included
  • PCIe bus power supply 75W max.
  • High-profile card mounting screws included
  • Dimensions 220x65mm
  • height with mounting screws 134mm
  • Physical PCIe 3.0 x16 connector
  • Compatibility macOS*, Windows

* macOS on computers with Silicon processors, i.e. M1, M2, M3 or M4, does not support external eGPU graphics cards.

Comments (0)

You may also like: