m.2 NVMe PCIe SSD drive bay Abart Pro Sonic Express by ACASIS is a durable, aesthetic and well-dissipating bus-powered PCIe NVMe drive enclosure compatible with Thunderbolt 3, Thunderbolt 4, USB4, USB3 ports
This universal pocket is compatible with all USB-C standards, i.e. Thunderbolt™ 4, Thunderbolt™ 3, USB4, USB3.2, USB3.1, USB3.0 and with desktop computers, notebooks, mobile devices such as iPad and phones with USB-C connector
High transfer up to 40Gb/s also on Apple computers with M1, M1Pro and M1 MAX processors
Ribbed casing increasing the cooling surface!
Abart Pro Sonic Express by ACASIS is a durable, aesthetic and well-dissipating case for a PCIe NVMe drive.
The Abart Pro Sonic Express housing is powered by a bus with a universal USB-C connector,
Transfer up to 40Gb/s also on Apple computers with M1, M1Pro and M1 MAX processors
The case is 100% compatible with Apple Mac computers , iPads equipped with a USB-C port, phones and tablets with a USB-C port , and Windows computers equipped with a Thunderbolt™ or USB-C port.
Full compatibility with all USB standards
The speeds of writing and reading data obtained with the Samsung 980 Pro 1TB drive connected via a housing to an Apple MacBook Pro computer are 2312MB/s (writing) and 2772 MB/s reading.
This universal pocket is compatible with all USB-C standards, i.e. Thunderbolt ™ 4, Thunderbolt ™ 3, USB4, USB3.2, USB3.1, USB3.0, including desktop computers, notebooks, mobile devices such as iPad and phones. with USB-C connector
After using an adapter - not included in the set - the pocket is also compatible with the USB 2.0 standard
Mobility and incredible speed
Thanks to its size of 10 cm long x 5.7 cm wide x 1.4 cm high and its power supply from the bus, the Abart Pro EV1 housing is very convenient to use. The aluminum casing successfully dissipates excess heat generated during disk operation.
Despite its small size, the housing allows transfer rates of up to 40Gb/s. With Apple computers - including the latest MacBook Pro 14" and 16" models equipped with M1Pro and M1Max processors, you can achieve transfers of 2,300MB/s (writing) and 2,935MB/s reading*
*The transfer depends on the NVMe drive used and the connected computer.
Look forward
The Abart Pro NV1 by ACASIS housing allows the installation of a drive with a capacity of up to 16TB. It doesn't matter what disk you install now. The housing is designed for the largest capacities currently available. And thanks to the use of the latest electronics, the housing will support higher, currently unavailable NVMe drive capacities.
Easy way to mount the disk
You can easily install an NVMe drive without any tools. Just open the protective flap, insert the disk into the slot, securing it with a rubber pin, and then close the flap with a click. Additionally, the pocket comes with a thermal pad glued to the disk.
Technical Specifications:
