Abart Pro MOX 10GbE RJ45 Marvell mGig AQC113 PCIe 4.0 MultiSpeed

The Marvell® AQC113 10GbE RJ45 network card is a high-performance, scalable mGig Ethernet MAC+PHY controller designed to support the following network speeds: 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX/10BASE-T. Equipped with a PCI Express Gen 4 x4 interface, this family of scalable mGig Ethernet MAC+PHY controllers easily supports 10 GbE bandwidth.

Marvell’s scalable mGig controllers are compatible with both the IEEE® 802.3an/bz standard and the NBASE-T™ Alliance PHY specification, enabling all the physical layer functions required to support transmission distances of over 100 meters using copper cabling (TP).

Key features and functions:

• Energy Efficient Ethernet (EEE), 
• Precision Time Protocol (PTP)/1588v2, 
• Synchronous Ethernet (Sync-E),
• boot function with hardware security, 
• support for AQC113-AQC115C multifunction I/O, 
• support for all PoE standards up to 100 W
• support for jumbo frames up to 16 KB in all operating modes. support for all six network speeds (from 10 Gb/s down to the lowest speeds),
• Marvell AQtion – state-of-the-art solutions for motherboards, PCs, workstations, docking stations, NAS servers, routers, network gateways, and other embedded applications
• Single-chip solution • Integrated PCIe and MAC+PHY chips minimize board space and power consumption
• PCI Express Gen4, Gen3, or Gen2 • Supports speeds of up to 16.0 GT/s, 8.0 GT/s, and 5.0 GT/s per lane
• Supported bus widths • Supports Gen 4 x1, Gen 3 x4, Gen 3 x2, or Gen 3 x1, Gen 2 x2
• Message-signaled interrupts (MSI and MSI-X) and legacy PCIe INTx interrupts • Improves CPU utilization and network performance • Communication and management function
• Sideband SMBus interface (SMBus slave interface) • Communication and management function
• Secure boot function • S-series devices support an on-chip eFuse, providing a secure boot function for these devices running under a security-oriented operating system
• External SPI FLASH interface with optional support for no-FLASH mode • Reduced BOM costs by reducing the number of or completely eliminating FLASH devices • Enables firmware download/update and FLASH image loading during production
• Drivers: Windows 10 and Windows 11 (64-bit) and Linux 3.10 and later.
• Boot options: UEFI and PXE
• Form factor: Low-profile and full-height